Configuring The Remote Backup Service - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Different priorities need to be configured for two devices in the VRRP backup group, with the
device of a higher priority as the master device.
----End

11.2.3 Configuring the Remote Backup Service

To configure a remote backup service, you need to configure a TCP connection for a remote
server and a monitoring interface.
Context
Do as follows on the devices that back up each other:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
remote-backup-service
The remote backup service view is displayed.
Step 3 Run:
peer
The TCP connection with the remote server is set up.
The peer-ip-address parameter specifies the IP address of the peer device; the local-ip-
address parameter specifies the IP address of the local device. The IP address of the peer device
must have been set on a main interface, sub-interface, or logical interface (such as a loopback
interface) of the peer device. Similarly, the IP address of the local device must have been set on
a main interface, sub-interface, or logical interface (such as a loopback interface) of the local
device. In addition, the two IP addresses can be pinged successfully. port-id specifies the number
of the interface that is listened to by the server. The numbers of the interfaces for the TCP
connection must be the same on the two devices that back up each other.
Step 4 (Optional) Run:
batch-backup
The data of all the configured services of the RBS is synchronized. Ensure that RUI entries on
the two devices are the same.
Step 5 (Optional) Run:
track interface
The RBS is configured to track the network-side interface status. In this manner, the NE80E/
40E can detect the fault occurrence or recovery of the TCP connection established by the RBS.
Step 6 (Optional) Run:
track bfd-session
Issue 02 (2011-09-10)
service-name
peer-ip-address source source-ip-address port port-id
NOTE
The port with the number 6000 is preserved for other protocols and is currently unavailable.
service-type { service-type | all } daily day-time
interface-name
bfd-session
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-Device Backup Configuration
728