Globally Configuring The Destination Port Number - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
l
Pre-configuration Tasks
Before globally configuring the destination port number for the multi-hop BFD control packet,
complete the following tasks:
l
l
Data Preparation
To globally configure the destination port number for the multi-hop BFD control packet, you
need the following data.
No.
1

5.12.2 Globally Configuring the Destination Port Number

You can configure a global destination port number for multi-hop BFD control packets according
to the specified devices running a distinct version or the specified vendor's devices.
Context
Do as follows on each device:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bfd
BFD is enabled globally on the local node and the BFD view is displayed.
Step 3 Run:
multi-hop
The destination port number is configured globally for the multi-hop BFD control packet.
Issue 02 (2011-09-10)
To interwork with the device running the version earlier than the NE80E/40E, the device
running the NE80E/40E can be configured with destination port 3784 for the multi-hop
BFD control packet.
To interwork with the non-Huawei device, the device running the NE80E/40E can be
configured with destination port 4784 for the multi-hop BFD control packet.
Installing the device and turning it on properly
Connecting interfaces correctly
Data
Name of the device
destination-port { 3784 | 4784 }
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 BFD Configuration
274