Huawei NetEngine80E Configuration Manual - Reliability page 497

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Procedure
Step 1 Configure the aggregation group in static LACP mode.
The detailed configuration is not mentioned here. For details, refer to the HUAWEI
NetEngine80E/40E Router Configuration Guide - LAN Access and MAN Access.
Step 2 Configure Ethernet CFM.
# Enable Ethernet CFM globally on Router A.
[RouterA] cfm enable
# Create the MD, MA, MEP, and RMEP on Router A.
[RouterA] cfm md md1
[RouterA-md-md1] ma ma1
[RouterA-md-md1-ma-ma1] ccm-interval 10
[RouterA-md-md1-ma-ma1] mep mep-id 2 interface gigabitethernet 1/0/1 outward
[RouterA-md-md1-ma-ma1] remote-mep mep-id 1
[RouterA-md-md1-ma-ma1] mep ccm-send enable
[RouterA-md-md1-ma-ma1] remote-mep ccm-receive enable
[RouterA-md-md1-ma-ma1] quit
[RouterA-md-md1] ma ma2
[RouterA-md-md1-ma-ma2] ccm-interval 10
[RouterA-md-md1-ma-ma2] mep mep-id 4 interface gigabitethernet 1/0/2 outward
[RouterA-md-md1-ma-ma2] remote-mep mep-id 3
[RouterA-md-md1-ma-ma2] mep ccm-send enable
[RouterA-md-md1-ma-ma2] remote-mep ccm-receive enable
[RouterA-md-md1-ma-ma2] quit
[RouterA-md-md1] ma ma3
[RouterA-md-md1-ma-ma3] ccm-interval 10
[RouterA-md-md1-ma-ma3] mep mep-id 6 interface gigabitethernet 1/0/3 outward
[RouterA-md-md1-ma-ma3] remote-mep mep-id 5
[RouterA-md-md1-ma-ma3] mep ccm-send enable
[RouterA-md-md1-ma-ma3] remote-mep ccm-receive enable
[RouterA-md-md1-ma-ma3] quit
[RouterA-md-md1] quit
# Enable Ethernet CFM globally on Router B.
[RouterB] cfm enable
# Create the MD, MA, MEP, and RMEP on Router B.
[RouterB] cfm md md1
[RouterB-md-md1] ma ma1
[RouterB-md-md1-ma-ma1] ccm-interval 10
[RouterB-md-md1-ma-ma1] mep mep-id 1 interface gigabitethernet 1/0/1 outward
[RouterB-md-md1-ma-ma1] remote-mep mep-id 2
[RouterB-md-md1-ma-ma1] mep ccm-send enable
[RouterB-md-md1-ma-ma1] remote-mep ccm-receive enable
[RouterB-md-md1-ma-ma1] quit
[RouterB-md-md1] ma ma2
[RouterB-md-md1-ma-ma2] ccm-interval 10
[RouterB-md-md1-ma-ma2] mep mep-id 3 interface gigabitethernet 1/0/2 outward
[RouterB-md-md1-ma-ma2] remote-mep mep-id 4
[RouterB-md-md1-ma-ma2] mep ccm-send enable
[RouterB-md-md1-ma-ma2] remote-mep ccm-receive enable
[RouterB-md-md1-ma-ma2] quit
[RouterB-md-md1] ma ma3
[RouterB-md-md1-ma-ma3] ccm-interval 10
[RouterB-md-md1-ma-ma3] mep mep-id 5 interface gigabitethernet 1/0/3 outward
[RouterB-md-md1-ma-ma3] remote-mep mep-id 6
[RouterB-md-md1-ma-ma3] mep ccm-send enable
[RouterB-md-md1-ma-ma3] remote-mep ccm-receive enable
[RouterB-md-md1-ma-ma3] quit
[RouterB-md-md1] quit
[RouterB] quit
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
480