Huawei NetEngine80E Configuration Manual - Reliability page 553

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE1-bgp-vpna] import-route direct
[PE1-bgp-vpna] import-route static
[PE1-bgp-vpna] quit
# Configure PE2.
[PE2] ip route-static vpn-instance vpna 1.1.1.1 32 10.1.1.1
[PE2] bgp 100
[PE2-bgp] ipv4-family vpn-instance vpna
[PE2-bgp-vpna] import-route direct
[PE2-bgp-vpna] import-route static
[PE2-bgp-vpna] quit
# Configure CE1. Configure the virtual IP address of the VRRP backup group as the gateway
address.
[CE1] ip route-static 0.0.0.0 0.0.0.0 10.1.1.111
Step 7 Set up MP-IBGP peer relationships between PE1, PE2, and PE3.
# Configure PE1.
[PE1] bgp 100
[PE1-bgp] peer 3.3.3.3 as-number 100
[PE1-bgp] peer 3.3.3.3 connect-interface loopback 1
[PE1-bgp] peer 4.4.4.4 as-number 100
[PE1-bgp] peer 4.4.4.4 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp] peer 3.3.3.3 enable
[PE1-bgp] peer 4.4.4.4 enable
[PE1-bgp] quit
# Configure PE2.
[PE2] bgp 100
[PE2-bgp] peer 2.2.2.2 as-number 100
[PE2-bgp] peer 2.2.2.2 connect-interface loopback 1
[PE2-bgp] peer 4.4.4.4 as-number 100
[PE2-bgp] peer 4.4.4.4 connect-interface loopback 1
[PE2-bgp] ipv4-family vpnv4
[PE2-bgp] peer 2.2.2.2 enable
[PE2-bgp] peer 4.4.4.4 enable
[PE2-bgp] quit
# Configure PE3.
[PE3] bgp 100
[PE3-bgp] peer 2.2.2.2 as-number 100
[PE3-bgp] peer 2.2.2.2 connect-interface loopback 1
[PE3-bgp] peer 3.3.3.3 as-number 100
[PE3-bgp] peer 3.3.3.3 connect-interface loopback 1
[PE3-bgp] ipv4-family vpnv4
[PE3-bgp] peer 2.2.2.2 enable
[PE3-bgp] peer 3.3.3.3 enable
[PE3-bgp] quit
Step 8 Configure the VRRP backup group on PE1 and PE2 to track the traffic of the downstream
interface.
# Configure PE1.
[PE1] interface vlanif 10
[PE1-vlanif10] vrrp vrid 1 virtual-ip 10.1.1.111
[PE1-vlanif10] vrrp vrid 1 track interface gigabitethernet 3/0/0 reduced 60
[PE1-vlanif10] quit
# Configure PE2.
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
536