Huawei NetEngine80E Configuration Manual - Reliability page 503

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[RouterC] interface gigabitethernet 1/0/0
[RouterC-GigabitEthernet1/0/0] efm enable
[RouterC-GigabitEthernet1/0/0] quit
# Configure Router D.
[RouterD] efm enable
[RouterD] interface gigabitethernet 1/0/0
[RouterD-GigabitEthernet1/0/0] efm mode passive
[RouterD-GigabitEthernet1/0/0] efm enable
[RouterD-GigabitEthernet1/0/0] quit
Step 5 Associate EFM OAM with Ethernet CFM.
# Associate EFM OAM running between Router A and Router B with Ethernet CFM running
between Router B and Router C.
[RouterB] oam-mgr
[RouterB-oam-mgr] oam-bind cfm md md1 ma ma1 efm interface gigabitethernet 1/0/0
# Associate Ethernet CFM running between RouterB and RouterC with EFM OAM running
between Router C and Router D.
[RouterC] oam-mgr
[RouterC-oam-mgr] oam-bind cfm md md1 ma ma1 efm interface gigabitethernet 1/0/0
Step 6 Verify the configuration.
After the preceding configuration, when EFM OAM running between Router A and Router B
detects faults, Ethernet CFM notifies EFM OAM running between Router C and Router D of
the faults.
----End
Configuration Files
l
l
Issue 02 (2011-09-10)
Configuration file of Router A
#
sysname RouterA
#
vlan batch 10
#
efm enable
#
interface GigabitEthernet1/0/0
portswitch
port trunk allow-pass vlan 10
efm mode passive
efm enable
#
interface GigabitEthernet2/0/0
portswitch
port trunk allow-pass vlan 10
#
return
Configuration file of Router B
#
sysname RouterB
#
vlan batch 10
#
efm enable
#
cfm enable
#
interface GigabitEthernet1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
486