Checking The Configuration - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability

4.4.5 Checking the Configuration

By viewing the status of a BFD session or an EFM OAM session tracked by a VRRP backup
group, you can check whether the configurations are successful.
Prerequisite
The configurations of the VRRP fast switchover function are complete.
Procedure
l
l
----End
Example
Run the
is Up. The command output is as follows:
<HUAWEI> display vrrp
GigabitEthernet1/0/0.3 | Virtual Router 1
GigabitEthernet1/0/0.2 | Virtual Router 2
Issue 02 (2011-09-10)
Run the display vrrp [ interface interface-type interface-number [ virtual-router-id ] ]
command to check the status of VRRP.
Run the display vrrp6
id ] ] [ brief ] command to view status and parameters of the VRRP6 backup group.
display vrrp command, and you can view that the BFD session that is tracked by VRRP
State : Backup
Virtual IP : 192.168.1.100
Master IP : 192.168.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 130
Preempt : YES
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Check TTL : YES
Config type : normal-vrrp
Config track link-bfd down-number : 0
Track BFD : 1
BFD-session state : Up
Create time : 2010-06-22 17:32:56
Last change time : 2010-06-22 17:33:00
State : Backup
Virtual IP : 192.168.2.254
Master IP : 192.168.2.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
Preempt : yes
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Check TTL : YES
Config type : admin-vrrp
Config track link-bfd down-number : 0
Track EFM : GigabitEthernet2/0/0
EFM state : up
Track BFD : 2
BFD-session state : up
Create time : 2010-06-23 17:32:56
Last change time : 2010-06-23 17:33:00
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
[ interface interface-type interface-number [ vrid virtual-router-
Delay Time : 0
Priority increased : 20
Delay time : 0
type : peer
4 VRRP Configuration
96