Huawei NetEngine80E Configuration Manual - Reliability page 491

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
The configurations on Router D and Router F are the same as the configurations on Router A,
and are not mentioned here.
Step 8 Create and configure MA2 within MD1 on all the devices except for Router B and Router C.
# Create MA2 within MD1 on Router A.
[RouterA-md-md1] ma ma2
[RouterA-md-md1-ma-ma2] map vlan 3
[RouterA-md-md1-ma-ma2] quit
[RouterA-md-md1] quit
# Create MA2 within MD1 on Router D and Router E.
The configurations on Router D and Router E are the same as the configurations on Router A,
and are not mentioned here.
Step 9 Create and configure MEPs and RMEPs in MA1 within MD1 on Router A and Router F.
# Create and configure a MEP in MA1 within MD1 on Router A.
[RouterA] cfm md md1
[RouterA-md-md1] ma ma1
[RouterA-md-md1-ma-ma1] mep mep-id 2 interface gigabitethernet 1/0/1 inward
# Create and configure a MEP in MA1 within MD1 on Router F.
[RouterF] cfm md md1
[RouterF-md-md1] ma ma1
[RouterF-md-md1-ma-ma1] mep mep-id 1 interface gigabitethernet 1/0/1 inward
# Create and configure an RMEP in MA1 within MD1 on Router A.
[RouterA-md-md1-ma-ma1] remote-mep mep-id 1
# Create and configure an RMEP in MA1 within MD1 on RouterF.
[RouterF-md-md1-ma-ma1] remote-mep mep-id 2
Step 10 Create and configure MEPs and RMEPs in MA2 within MD1 on Router A and Router E.
# Create and configure a MEP in MA2 within MD1 on Router A.
[RouterA] cfm md md1
[RouterA-md-md1] ma ma2
[RouterA-md-md1-ma-ma2] mep mep-id 1 interface gigabitethernet 1/0/2 inward
# Create and configure a MEP in MA2 within MD1 on Router E.
[RouterE] cfm md md1
[RouterE-md-md1] ma ma2
[RouterE-md-md1-ma-ma2] mep mep-id 2 interface gigabitethernet 1/0/2 inward
# Create and configure an RMEP in MA2 within MD1 on Router A.
[RouterA-md-md1-ma-ma2] remote-mep mep-id 2
# Create and configure an RMEP in MA2 within MD1 on Router E.
[RouterE-md-md1-ma-ma2] remote-mep mep-id 1
Step 11 Enable the CCM transmission function.
# Enable the function of sending CCMs on all MEPs of Router A.
[RouterA-md-md1-ma-ma2] mep ccm-send enable
# Enable Router A with the function of receiving CCMs from the RMEP.
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
474