Configuring Dual-Device Arp Hot Backup; Establishing The Configuration Task - Huawei NetEngine80E Configuration Manual - Reliability

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Context
Run the following commands to check the previous configuration.
Procedure
l
l
----End
Example
<HUAWEI>display remote-backup-profile test
--------------------------------------------
Profile-Index
Profile-Name
Service
Remote-backup-service: test
Backup-ID
track protocol
VRRP-ID
VRRP-Interface
Interface
State
Peer State
Backup mode
Slot-Number
Card-Number
Port-Number
<HUAWEI>display remote-backup-service test
-------------------------------------------------------
Service-Index
Service-Name
TCP-State
Peer-ip
Source-ip
TCP-Port
Track-BFD
Track-interface0 : GigabitEthernet2/0/0
Track-interface1 : --
Last up time
Last down time
Last down reason : TCP closed for packet error.
Batch-backup
--------------------------------------------------

11.3 Configuring Dual-Device ARP Hot Backup

Dual-device ARP hot backup allows you to back up ARP entries from the master device to the
slave device, ensuring uninterrupted link forwarding when a master/backup VRRP switchover
occurs.

11.3.1 Establishing the Configuration Task

Before configuring dual-device ARP hot backup, familiarize yourself with the deployment
scenario, complete the pre-configuration tasks, and obtain the data required for the configuration.
This will help you complete the configuration task quickly and efficiently.
Issue 02 (2011-09-10)
Run the
display remote-backup-profile
about the RBP.
Run the
display remote-backup-service
information about the RBS.
: 0x802
: test
:
: 10
: VRRP
: 1
: GigabitEthernet1/0/0.2
:
: Master
: Slave
: hot
: 1
: 0
: 0
: 0
: test
: Connected
: 88.88.88.88
: 22.22.22.22
: 6000
: --
: 2009-11-2 16:15:8
: 2009-11-2 16:3:36
: 03:05:00(Daily)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-Device Backup Configuration
profile-name command to check information
[ service-name [verbose ]] command to check
730

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents