Huawei NetEngine80E Configuration Manual - Reliability page 199

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure the Eth-Trunk interface on NPE1 and NPE2.
# Configure NPE1.
<HUAWEI> system-view
[HUAWEI] sysname NPE1
[NPE1] interface Eth-Trunk 1
[NPE1-Eth-Trunk1] quit
[NPE1] interface gigabitethernet1/0/2
[NPE1-GigabitEthernet1/0/2] undo shutdown
[NPE1-GigabitEthernet1/0/2] eth-trunk 1
[NPE1-GigabitEthernet1/0/2] quit
[NPE1] interface gigabitethernet2/0/1
[NPE1-GigabitEthernet2/0/1] undo shutdown
[NPE1-GigabitEthernet2/0/1] eth-trunk 1
[NPE1-GigabitEthernet2/0/1] quit
# Configure NPE2.
<HUAWEI> system-view
[HUAWEI] sysname NPE2
[NPE2] interface Eth-Trunk 1
[NPE2-Eth-Trunk1] quit
[NPE2] interface gigabitethernet1/0/2
[NPE2-GigabitEthernet1/0/2] undo shutdown
[NPE2-GigabitEthernet1/0/2] eth-trunk 1
[NPE2-GigabitEthernet1/0/2] quit
[NPE2] interface gigabitethernet2/0/1
[NPE2-GigabitEthernet2/0/1] undo shutdown
[NPE2-GigabitEthernet2/0/1] eth-trunk 1
[NPE2-GigabitEthernet2/0/1] quit
Step 2 Configure the sub-interface for QinQ VLAN tag termination on NPE1 and NPE2.
# Configure NPE1.
Issue 02 (2011-09-10)
Configure the sub-interface for QinQ VLAN tag termination on NPE1 and NPE2.
Configure the mVRRP backup group and service VRRP backup group on the sub-interfaces
for QinQ VLAN tag termination of NPE1 and NPE2 and bind the service VRRP backup
group with the mVRRP backup group.
Establish the BFD session between NPE1 and NPE2 and between the NPE and the CE.
Configure master/backup fast switchover of the mVRRP backup group using BFD
sampling.
Virtual Router IDs (VRIDs) and virtual IP addresses
Priorities of VRRP backup groups
NOTE
Only the configuration procedures of NPE1 and NPE2 are provided here. For the configuration procedures
of the BFD function of the CE as shown in
HUAWEI NetEngine80E/40E Router Configuration Guide - Reliability and Configuration Guide - VPN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-10
and the VPLS convergence network, refer to the
4 VRRP Configuration
182

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents