Example For Configuring On-Demand One-Way Frame Delay Measurement On A Vpls Network - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
9.10.10 Example for Configuring On-Demand One-way Frame
Delay Measurement on a VPLS Network
This section provides an example showing how to configure on-demand one-way frame delay
measurement on a PW in VPLS networking.
Networking Requirements
To ensure the reliability and stability of links between a user network and an operator network
and improve the operator's capability in monitoring links, Y.1731 must be configured on the
user network or the operator network.
Figure 9-25 Networking diagram for configuring single-ended frame loss measurement on a
VPLS network
This example shows how to configure on-demand one-way frame delay measurement on a PW
in VPLS networking.
Configuration Roadmap
The configuration roadmap is as follows:
1.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Issue 02 (2011-09-10)
#
return
PE1
GE1/0/2
GE1/0/1
GE1/0/1
CE1
User
Network
Configure on-demand one-way frame delay measurement on a PW between PEs.
VSI name
Alarm threshold of one-way frame delay measurement
Names of MDs and MAs on PE1 and PE2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/2
VPLS
GE1/0/1
GE1/0/1
CE2
9 Y.1731 Configuration
PE2
User
Network
641