Checking The Configuration - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability

4.2.4 Checking the Configuration

By viewing the status of a VRRP backup group, you can check whether the configurations are
successful.
Prerequisite
The configurations of the VRRP backup group function are complete.
Procedure
l
l
----End
Example
In the master/backup mode, after the configuration, you can run the
view the status of a VRRP backup group.
<HUAWEI> display vrrp
GigabitEthernet2/0/0 | Virtual Router 1
In the load balancing mode, after the configuration, you can run the
view the status of a router in different backup groups.
<HUAWEI> display vrrp
GigabitEthernet2/0/0 | Virtual Router 1
Issue 02 (2011-09-10)
Run the display vrrp [ interface interface-type interface-number [ virtual-router-id ] ]
[ brief ] command to check the status of VRRP backup group.
Run the display vrrp6
id ] ] [ brief ] command to check the status and the configurations of the VRRP6 backup
group.
State : Master
Virtual IP : 10.1.1.111
Master IP : 10.1.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Preempt : YES
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Config track link-bfd down-number : 0
Create time : 2010-06-22 17:32:56
Last change time : 2010-06-22 17:33:00
State : Master
Virtual IP : 10.1.1.111
Master IP : 10.1.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Preempt : YES
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Config track link-bfd down-number : 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
[ interface interface-type interface-number [ vrid virtual-router-
Delay Time : 20
Delay Time : 0
4 VRRP Configuration
display vrrp command to
display vrrp command to
84