Huawei NetEngine80E Configuration Manual - Reliability page 245

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure each host. The configurations are not mentioned here.
Configure the default gateway address used by Host A as backup group 1's virtual IPv6 address
being 2000::100. Configure the default gateway address of Host B as backup group 2's virtual
IPv6 address being 2000::60. Configure the default gateway address of Host C as 2003::2.
Step 2 Enable OSPFv3 on Router A, Router B, and Router C to interwork them. The configurations
are not mentioned here.
Step 3 Configure each VRRP6 backup group.
# Assign an IPv6 address to GE 1/0/0 on Router A. Create backup group 1 and backup group 2
on GE 1/0/0 of Router A. Configure Router A with the priority being 120 to ensure that
Router A functions as the master router in backup group 1. Configure Router A with the default
priority being 100 to ensure that Router A functions as the backup router in backup group 2.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] ipv6
[RouterA] interface gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] undo shutdown
[RouterA-GigabitEthernet1/0/0] ipv6 enable
[RouterA-GigabitEthernet1/0/0] ipv6 address 2000::1 64
[RouterA-GigabitEthernet1/0/0] vrrp6 vrid 1 virtual-ip FE80::1 link-local
[RouterA-GigabitEthernet1/0/0] vrrp6 vrid 1 virtual-ip 2000::100
[RouterA-GigabitEthernet1/0/0] vrrp6 vrid 1 priority 120
[RouterA-GigabitEthernet1/0/0] vrrp6 vrid 2 virtual-ip FE80::2 link-local
[RouterA-GigabitEthernet1/0/0] vrrp6 vrid 2 virtual-ip 2000::60
[RouterA-GigabitEthernet1/0/0] quit
# Assign an IPv6 address to GE 1/0/0 on Router B. Create backup group 1 and backup group 2
on GE 1/0/0 of Router B. Configure Router B with the default priority being 100 to ensure that
Router B is the backup router in backup group 1. Configure Router B with the priority being
120 to ensure that Router B is the master router in backup group 2.
<HUAWEI> system-view
[HUAWEI] sysname RouterB
[RouterB] ipv6
[RouterB] interface gigabitethernet 1/0/0
[RouterB-GigabitEthernet1/0/0] undo shutdown
[RouterB-GigabitEthernet1/0/0] ipv6 enable
Issue 02 (2011-09-10)
Create backup group 1 and backup group 2 on GE 1/0/0 of Router A. Router A is the master
router in backup group 1 and the backup router in backup group 2.
Create backup group 1 and backup group 2 on GE 1/0/0 of Router B. Router B is the backup
router in backup group 1 and the master router in backup group 2.
IPv6 address of each interface
ID and virtual IPv6 address of each backup group
Priority of each router in each VRRP6 backup group
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
228