Huawei NetEngine80E Configuration Manual - Reliability page 434

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
MEP Number
RMEP Number
Suppressing Alarms : No
Sending Ais Packet : No
Run the
the configuration is successful.
<HUAWEI> display cfm mep
The total number of MEPs is 2
MD Name
MD Name Format
Level
MA Name
MA Name Format
MEP ID
Vlan ID
VSI Name
Interface Name
CCM Send
Direction
MD Name
MD Name Format
Level
MA Name
MA Name Format
MEP ID
Vlan ID
VSI Name
Interface Name
CCM Send
Direction
Run the
means that the configuration is successful.
<HUAWEI> display cfm remote-mep
The total number of RMEPs is 2
MD Name
Level
MA Name
RMEP ID
Vlan ID
VSI Name
MAC
CCM Receive
Trigger-If-Down
CFM Status
MD Name
Level
MA Name
RMEP ID
Vlan ID
VSI Name
MAC
CCM Receive
Trigger-If-Down
CFM Status
Run the
the configuration is successful.
<HUAWEI> display mip create-type interface gigabitethernet1/0/1
Interface Name
---------------------------------------------------------------------------
GigabitEthernet1/0/1
Run the
the configuration is successful.
Issue 02 (2011-09-10)
:1
: 4
display cfm mep command. If information about the MEP is displayed, it means that
: md2
: string
: 7
: ma3
: string
: 40
: 10
: --
: GigabitEthernet1/0/1
: enabled
: outward
: md3
: string
: 3
: ma1
: string
: 100
: 20
: --
: GigabitEthernet2/0/1
: enabled
: outward
display cfm remote-mep
: md2
: 7
: ma3
: 110
: 20
: --
: 0000-0121-0222
: enabled
: disabled
: up
: md2
: 4
: ma3
: 30
: --
: --
: --
: enabled
: disabled
: up
display mip create-type
display cfm mip command. If information about the MIP is displayed, it means that
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command. If information about the RMEP is displayed, it
command. If the MIP generation rule is correct, it means that
MIP Create-Type MIP Create-Type On Interface
none --
8 Ethernet OAM Configuration
417