Huawei NetEngine80E Configuration Manual - Reliability page 5

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Change History
Changes in Issue 02 (2011-09-10)
Second commercial release.
l
l
Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Changes in Issue 01 (2011-06-30)
Initial commercial release.
Issue 02 (2011-09-10)
APS Configuration
– The feature of APS 1+1 bidirectional protection switchover is supported so that the
command keyword and description about this feature is added in
Configuring a Working Mode for an APS Group
Mode for an APS Group.
– The feature of low-priority signal failure code for a switching request carried in the K
byte on the protect interface is supported so that the command keyword and description
about this feature is added in
Group and 3.3.3 Configuring a Protection Interface in an APS
Y.1731 Configuration
9.10.12 Example for Configuring Y.1731 Statistics Based on QoS Simple Traffic
–
Classification is added in this chapter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
and
3.2.3 Configuring a Protection Interface in an APS
About This Document
3.2.4 (Optional)
3.3.4 Configuring a Working
Group.
iv