Huawei NetEngine80E Configuration Manual - Reliability page 728

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
l
Procedure
Step 1 Set up a PW over a bidirectional LSP.
For details about how to set up a PW (between LSRs) based on a bidirectional LSP, see see
"Configuring a PW" in the HUAWEI NetEngine80E/40E Router Configuration Guide-MPLS
or information in the configuration files of this configuration example.
Step 2 Create an ME and bind it to a PW.
# Create an ME named test on PE1 and bind the ME to the PW.
<HUAWEI> system-view
[HUAWEI] sysname PE1
[PE1] mpls-tp meg test
[PE1-mpls-tp-meg-test] me l2vc peer-ip 3.3.3.3 vc-id 30000 vc-type vlan mep-id 1
remote-mep-id 2
# Create an ME named test on PE3 and bind the ME to the PW.
<HUAWEI> system-view
[HUAWEI] sysname PE3
[PE3] mpls-tp meg test
[PE3-mpls-tp-meg-test] me l2vc peer-ip 1.1.1.1 vc-id 30000 vc-type vlan mep-id 2
remote-mep-id 1
Step 3 Enable LB.
LB can be used to detect the connectivity between a MEP and its RMEP or a MIP. In this example, LB is used
to detect the connectivity between PE1 and PE2.
Enable LB on PE1.
<PE1> ping meg test
PING test: 9 data bytes, press CTRL_C to break
--- ping statistics ---
----End
Configuration Files
l
Issue 02 (2011-09-10)
MEG name
ID of the VC bound to the ME
NOTE
Reply from vsi: bytes=9, Sequence=1 time=100 ms
Reply from vsi: bytes=9, Sequence=2 time=90 ms
Reply from vsi: bytes=9, Sequence=3 time=100 ms
3 packet(s) transmitted
3 packet(s) received
0.00% packet loss
round-trip min/avg/max 90/96/100 ms
Configuration file of PE1
#
sysname PE1
#
mpls lsr-id 1.1.1.1
mpls
mpls te
#
mpls l2vpn
#
bidirectional static-cr-lsp ingress Tunnel1/0/0
forward nexthop 2.1.1.2 out-label 20 bandwidth ct0 10000
backward in-label 20
#
pw-template tpatoc
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MPLS-TP OAM Configuration
711