Optional) Creating A Vlan - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Step 3 Run:
ma
The MA view is displayed.
Step 4 Run:
ccm-interval
The interval for the MEP sending or detecting CCMs within the local MA is set.
By default, the interval for the MEP sending or detecting CCMs within an MA is 1 second.
l The sending of CCMs is enabled by using the
l The receiving of CCMs is enabled by using the
If any of the preceding conditions is met in an MA, the interval for sending or detecting CCMs
in the MA cannot be modified. If you want to modify the interval for sending or detecting CCMs
in an MA, you must run the related undo commands to disable the sending or receiving of CCMs.
Step 5 Run:
mep ccm-send
The sending of CCMs is enabled on the MEP.
By default, a MEP is disabled to send CCMs.
If mep-id mep-id is not specified, all the MEPs in the MA are enabled to send CCMs.
Step 6 Run:
remote-mep ccm-receive
The receiving of CCMs from the RMEP within the same MA is enabled on the local MEP.
By default, the local MEP cannot receive CCMs from the RMEP.
When the local device is enabled to receive CCMs from an RMEP, and if connectivity faults are
detected between the local device and the RMEP through CC detection, the local device prompts
alarms of RMEP connectivity.
If mep-id mep-id is not specified, all the MEPs in the MA are enabled to receive CCMs from
all the RMEPs.
----End
Follow-up Procedure
l
l

8.6.11 (Optional) Creating a VLAN

Through the association between a VLAN and default MDs, all interfaces of the specified VLAN
can generate MIPs based on default MDs.
Context
Do as follows on each device:
Issue 02 (2011-09-10)
ma-name
interval
[ mep-id mep-id ] enable
[ mep-id mep-id ] enable
If you need to enable the CC detection in multiple MAs, repeat Step 3 to Step 6.
If you need to enable the CC detection in multiple MDs, repeat Step 2 to Step 6.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
mep ccm-send enable
remote-mep ccm-receive enable
command.
command.
414