Example For Configuring Proactive One-Way Frame Delay Measurement On A Vll - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
9.10.5 Example for Configuring Proactive One-Way Frame Delay
Measurement on a VLL
This section provides an example showing how to configure proactive one-way frame delay
measurement on a PW in VLL networking.
Networking Requirements
To ensure the reliability and stability of links between a user network and an operator network
and improve the operator's capability in monitoring links, Y.1731 must be configured on the
user network or the operator network.
Figure 9-20 Networking diagram for configuring Y.1731 on a VLL
This example shows how to configure proactive one-way frame delay measurement on a PW in
VLL networking.
Configuration Roadmap
The configuration roadmap is as follows:
l
l
Issue 02 (2011-09-10)
ospf 1
area 0.0.0.0
network 2.2.2.2 0.0.0.0
network 100.1.1.0 0.0.0.255
#
cfm md md1
ma ma1
map mpls l2vc 2 tagged
mep mep-id 2 interface GigabitEthernet1/0/1.1 inward
mep ccm-send mep-id 2 enable
remote-mep mep-id 1
remote-mep ccm-receive mep-id 1 enable
delay-measure one-way receive
#
return
PE1
GE1/0/2
GE1/0/1
GE1/0/1
CE1
User
Network
Configure a PW between PEs.
Complete basic CFM configurations.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/2
VLL
GE1/0/1
GE1/0/1
CE2
9 Y.1731 Configuration
PE2
User
Network
617