Checking The Statistics On Returned Test Packets; Optional) Manually Disabling Efm Oam Remote Loopback - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Follow-up Procedure
The parameter in this command cannot be modified when test packets are being sent.
Press Ctrl+C to stop sending test packets.

8.4.4 Checking the Statistics on Returned Test Packets

By viewing statistics of returned test packets, you can calculate the packet loss ratio.
Context
Do as follows on the device with an active interface on the link:
Procedure
Step 1 Run:
display test-packet result
Statistics of the returned test packets are displayed.
The displayed information includes:
l Number of sent test packets
l Number of received test packets
l Number of discarded test packets
l Total number of bytes of sent test packets
l Total number of bytes of received test packet
l Total number of bytes of discarded test packet
l Time to start the sending of test packet
l Time to end the sending of test packet
You can obtain the packet loss ratio on the link based on the preceding data.
----End

8.4.5 (Optional) Manually Disabling EFM OAM Remote Loopback

The EFM OAM remote loopback function can automatically time out or be disabled manually.
Context
Do as follows on the device with an active interface on the link:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface
Issue 02 (2011-09-10)
interface-type interface-number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
401