Huawei NetEngine80E Configuration Manual - Reliability page 705

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure a bidirectional LSP.
For details about the bidirectional LSP that is built based on LSRs, see "Configuring a Static
Bidirectional LSP" in the HUAWEI NetEngine80E/40E Router Configuration Guide-MPLS or
information in the configuration files of this configuration example.
Step 2 Create an ME and bind it to a bidirectional LSP.
# Create an ME named test on LSRA and bind the ME to Tunnel 1/0/0.
<HUAWEI> system-view
[HUAWEI] sysname LSRA
[LSRA] mpls-tp meg test
[LSRA-mpls-tp-meg-test] me te interface tunnel 1/0/0 mep-id 1 rmep-id 2
# Create an ME named test on LSRC and bind the ME to Tunnel 2/0/0.
<HUAWEI> system-view
[HUAWEI] sysname LSRC
[LSRC] mpls-tp meg test
[LSRC-mpls-tp-meg-test] me te interface tunnel 2/0/0 mep-id 2 rmep-id 1
Step 3 Configure the interval between CCM transmissions and priority of CCMs.
The same CCM transmission interval and priority of CCMs must be configured on the MEP and RMEP;
otherwise, alarms will be mistakenly reported.
# Set the CCM transmission interval to 100 ms and the priority of CCMs to 6 on LSRA.
[LSRA-mpls-tp-meg-test] cc interval 100
[LSRA-mpls-tp-meg-test] cc exp 6
# Set the CCM transmission interval to 100 ms and the priority of CCMs to 6 on LSRC.
[LSRC-mpls-tp-meg-test] cc interval 100
[LSRC-mpls-tp-meg-test] cc exp 6
Step 4 Enable CC and CV.
# Enable CC and CV on LSRA.
[LSRA-mpls-tp-meg-test] cc send enable
[LSRA-mpls-tp-meg-test] cc receive enable
[LSRA-mpls-tp-meg-test] return
# Enable CC and CV on LSRC.
[LSRC-mpls-tp-meg-test] cc send enable
[LSRC-mpls-tp-meg-test] cc receive enable
[LSRC-mpls-tp-meg-test] return
Step 5 Verify the configuration.
Run the display mpls-tp oam meg command on LSRA to view MEG information.
<LSRA> display mpls-tp oam meg test
--------------------------------------------------
MEG test
Issue 02 (2011-09-10)
MEG name
Name of the TE tunnel bound to the ME
Interval between CCM transmissions and priority of CCMs
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MPLS-TP OAM Configuration
688