HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
9.9 Configuring Two-Way Frame Delay Measurement on a VPLS Network
In VPLS networking, if the clocks of peer MEPs are not synchronized and the requirement for
delay measurement is not high, two-way frame delay measurement can be configured.
9.10 Configuration Examples
This section describes the typical deployment scenario of Y.1731, including the networking
requirements, configuration roadmap, and data preparation, and provides related configuration
files.
Issue 02 (2011-09-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Y.1731 Configuration
553