Configuring Vrrp To Track The Status Of An Interface; Establishing The Configuration Task - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
GigabitEthernet2/0/0 | Virtual Router 2
After the configuration, run the
information about the VRRP6 backup group.
<HUAWEI> display vrrp6
GigabitEthernet1/0/0 | Virtual Router 1

4.3 Configuring VRRP to Track the Status of an Interface

By configuring a VRRP backup group to track the interface status, you can implement the backup
function when the interface fails.

4.3.1 Establishing the Configuration Task

Before configuring a VRRP backup group to track the interface status, familiarize yourself with
the applicable environment and complete the pre-configuration task of configuring a VRRP
backup group.
Applicable Environment
VRRP tracking interface status provides the backup function when the interface where the VRRP
backup group resides is faulty or when another interface on the router is faulty.
The method of tracking the status of the interface are as follows:
Issue 02 (2011-09-10)
Create time : 2010-06-21 17:32:56
Last change time : 2010-06-21 17:33:00
State : Backup
Virtual IP : 10.1.1.112
Master IP : 10.1.1.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
Preempt : YES
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0102
Check TTL : YES
Config type : normal-vrrp
Config track link-bfd down-number : 0
Create time : 2010-06-18 17:32:56
Last change time : 2010-06-18 17:33:00
State : Master
Virtual IP : FE80::1:2
Master IP : FE80::218:82FF:FED3:2AF1
PriorityRun : 200
PriorityConfig : 200
MasterPriority : 200
Preempt : YES
TimerRun : 100
TimerConfig : 100
Virtual Mac : 0000-5e00-0201
Uncheck hop limit : YES
Accept Mode : ON
Config type : normal-vrrp
Track If : GigabitEthernet3/0/4
IF State : UP
Create time : 2010-06-23 17:32:56
Last change time : 2010-06-23 17:33:00
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Delay Time : 0
display vrrp6 command on the router, and you can view
Delay Time : 0
priority reduced : 70
4 VRRP Configuration
85