Configuring Mvrrp Backup Groups; Establishing The Configuration Task - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Config track link-bfd down-number : 0
<HUAWEI> display vrrp6
GigabitEthernet1/0/0 | Virtual Router 1

4.11 Configuring mVRRP Backup Groups

An mVRRP backup group can be bound to other member backup groups and determine the
status of member backup groups according to the bindings. This is applicable to the scenario
where a device is dual-homed to master and slave devices on a MAN.

4.11.1 Establishing the Configuration Task

Before configuring an mVRRP backup group, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Application Environment
Figure 4-4 mVRRP determines the dual-homing of the master and slave routeres
UPE
Issue 02 (2011-09-10)
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time : 2010-06-22 17:32:56
Last change time : 2010-06-22 17:33:00
State : Master
Master IP : FE80::218:82FF:FED3:2AF1
Virtual IP : FE80::1:2
PriorityRun : 200
PriorityConfig : 200
MasterPriority : 200
Preempt : YES
TimerRun : 200
TimerConfig : 20
Virtual Mac : 0000-5e00-0201
Uncheck hop limit : YES
Accept Mode : ON
Config type : normal-vrrp
Track If : GigabitEthernet3/0/4
IF State : UP
Create time : 2010-06-23 17:32:56
Last change time : 2010-06-23 17:33:00
mVRRP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Delay Time : 0
priority reduced : 70
NPE1
NPE2
4 VRRP Configuration
126