Huawei NetEngine80E Configuration Manual - Reliability page 563
Hide thumbs
Also See for NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (1301 pages) ,
- Installation manual (169 pages)
Table of Contents
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE1-GigabitEthernet3/0/0] efm enable
[PE1-GigabitEthernet3/0/0] quit
# Configure PE2.
[PE2] efm enable
[PE2] interface gigabitethernet 3/0/0
[PE2-GigabitEthernet3/0/0] efm enable
[PE2-GigabitEthernet3/0/0] quit
# Configure CE1.
[CE1] efm enable
[CE1] interface gigabitethernet 1/0/0
[PE2-GigabitEthernet1/0/0] efm enable
[PE2-GigabitEthernet1/0/0] quit
interface gigabitethernet 2/0/0
[PE2-GigabitEthernet2/0/0] efm enable
[PE2-GigabitEthernet2/0/0] quit
Step 5 Configure the static routes on PE1 and PE2 that are destined for CE1. Then configure EFM
OAM extension for static routes, and import the static routes to BGP.
# Configure PE1.
[PE1] ip route-static vpn-instance vpna 1.1.1.1 32 10.1.1.1 track efm-state
gigabitethernet 3/0/0
[PE1] bgp 100
[PE1-bgp] ipv4-family vpn-instance vpna
[PE1-bgp-vpna] import-route direct
[PE1-bgp-vpna] import-route static
[PE1-bgp-vpna] quit
[UPE] interface gigabitethernet 1/0/3
[UPE-GigabitEthernet1/0/2] efm enable
[UPE-GigabitEthernet1/0/2] quit
# Configure PE2.
[PE2] ip route-static vpn-instance vpna 1.1.1.1 32 10.2.1.1 track efm-state
gigabitethernet 3/0/0
[PE2] bgp 100
[PE2-bgp] ipv4-family vpn-instance vpna
[PE2-bgp-vpna] import-route direct
[PE2-bgp-vpna] import-route static
[PE2-bgp-vpna] quit
Step 6 Set up MP-IBGP peer relationships between PE1, PE2, and PE3.
# Configure PE1.
[PE1] bgp 100
[PE1-bgp] peer 3.3.3.3 as-number 100
[PE1-bgp] peer 3.3.3.3 connect-interface loopback 1
[PE1-bgp] peer 4.4.4.4 as-number 100
[PE1-bgp] peer 4.4.4.4 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp] peer 3.3.3.3 enable
[PE1-bgp] peer 4.4.4.4 enable
[PE1-bgp] quit
# Configure PE2.
[PE2] bgp 100
[PE2-bgp] peer 2.2.2.2 as-number 100
[PE2-bgp] peer 2.2.2.2 connect-interface loopback 1
[PE2-bgp] peer 4.4.4.4 as-number 100
[PE2-bgp] peer 4.4.4.4 connect-interface loopback 1
[PE2-bgp] ipv4-family vpnv4
[PE2-bgp] peer 2.2.2.2 enable
Issue 02 (2011-09-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
546
Advertisement
Table of Contents
