Huawei NetEngine80E Configuration Manual - Reliability page 720

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
For details about how to configure a bidirectional LSP between T-PEs, see "Configuring a Static
Bidirectional LSP" in the HUAWEI NetEngine80E/40E Router Configuration Guide-MPLS or
information in the configuration files of this configuration example.
Step 2 Create an ME and bind it to a bidirectional LSP.
# Create an ME named test on LSRA and bind the ME to Tunnel 1/0/0.
<HUAWEI> system-view
[HUAWEI] sysname LSRA
[LSRA] mpls-tp meg test
[LSRA-mpls-tp-meg-test] me te interface tunnel 1/0/0 mep-id 1 rmep-id 2
[LSRA-mpls-tp-meg-test] cc send enable
[LSRA-mpls-tp-meg-test] cc receive enable
# Create an ME named test on LSRC and bind the ME to Tunnel 2/0/0.
<HUAWEI> system-view
[HUAWEI] sysname LSRC
[LSRC] mpls-tp meg test
[LSRC-mpls-tp-meg-test] me te interface tunnel 2/0/0 mep-id 2 rmep-id 1
[LSRC-mpls-tp-meg-test] cc send enable
[LSRC-mpls-tp-meg-test] cc receive enable
Step 3 Enable AIS in the MEG view of LSRA.
<HUAWEI> system-view
[HUAWEI] sysname LSRA
[LSRA-mpls-tp-meg-test] ais enable
Step 4 Verify the configuration.
Run the display this command in the interface view on LSRB to view AIS information on LSRB.
[LSRA-mpls-tp-meg-test] display this
#
mpls-tp meg test
me te interface tunnel 1/0/0 mep-id 1 rmep-id 2
cc send enable
cc receive enable
ais enable
#
----End
Configuration Files
l
Issue 02 (2011-09-10)
Configuration file of LSRA
#
sysname LSRA
#
mpls lsr-id 1.1.1.1
mpls
mpls te
#
bidirectional static-cr-lsp ingress Tunnel1/0/0
forward nexthop 2.1.1.2 out-label 20 bandwidth ct0 10000
backward in-label 20
#
interface Pos1/0/0
undo shutdown
ip address 2.1.1.1 255.255.255.0
mpls
mpls te
mpls te bandwidth max-reservable-bandwidth 100000
mpls te bandwidth bc0 100000
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MPLS-TP OAM Configuration
703