Example For Configuring Proactive Dual-Ended Frame Loss Measurement On A Vll - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
9.10.3 Example for Configuring Proactive Dual-Ended Frame Loss
Measurement on a VLL
This section describes how to configure proactive dual-end frame loss measurement on a PW
in VLL networking by using an example.
Networking Requirements
To ensure the reliability and stability of links between a user network and an operator network
and improve the operator's capability in monitoring links, Y.1731 must be configured on the
user network or the operator network.
Figure 9-18 Networking diagram for configuring Y.1731 on a VLL
The configurations of proactive dual-ended frame loss measurement on a PW in VLL networking
are described in this example.
Configuration Roadmap
The configuration roadmap is as follows:
l
Data Preparation
To complete the configuration, you need the following data.
l
l
Procedure
Step 1 Configure dual-ended frame loss measurement on a PW between PEs.
1.
Issue 02 (2011-09-10)
PE1
GE1/0/2
GE1/0/1
GE1/0/1
CE1
User
Network
Configure dual-ended frame loss measurement on a PW between PEs.
VC ID
Names of MDs and MAs on PE1 and PE2
Configure a VLL connection.
Configure a VLL connection between PE1 and PE2. The configuration details are not
provided here. For details, see the chapter "VLL Configuration" in the HUAWEI
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/2
VLL
GE1/0/1
GE1/0/1
CE2
9 Y.1731 Configuration
PE2
User
Network
609