Checking The Configuration - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
----End

8.15.4 Checking the Configuration

By viewing whether traffic on CEs is switched to a backup path, you can check whether the
configurations are successful.
Prerequisite
After the preceding configuration, when MPLS OAM or BFD enabled between PE1 and PE2
detects faults, EFM OAM and CFM notify CE1 of the faults and then traffic is switched to the
bypass tunnel for CE1.
Issue 02 (2011-09-10)
oam-bind cfm md md-name ma ma-name bfd-session bfd-session-id
The bidirectional transmission of fault messages between Ethernet CFM and BFD is
configured.
oam-bind ingress efm interface
session bfd-session-id
EFM OAM is configured to send fault messages to BFD.
oam-bind ingress bfd-session
interface-number
BFD is configured to send fault messages to EFM OAM.
oam-bind efm interface
id
The bidirectional transmission of fault messages between EFM OAM and BFD is configured.
oam-bind ingress cfm md
tunnel-number
Ethernet CFM is configured to send fault messages to MPLS OAM.
oam-bind ingress mpls oam
id } egress cfm md md-name ma ma-name
MPLS OAM is configured to send fault messages to Ethernet CFM.
oam-bind ingress efm interface
interface tunnel tunnel-number
EFM OAM is configured to send fault messages to MPLS OAM.
oam-bind ingress mpls oam
tunnel-id } egress efm interface interface-type interface-number
MPLS OAM is configured to send fault messages to EFM OAM.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
interface-type interface-number egress bfd-
bfd-session-id egress efm interface interface-type
interface-type interface-number bfd-session bfd-session-
md-name ma ma-name egress mpls oam interface tunnel
{ lsp-name lsp-name | lsr-id lsr-id tunnel-id tunnel-
interface-type interface-number egress mpls oam
{ lsp-name lsp-name | lsr-id ingress-lsr-id tunnel-id
8 Ethernet OAM Configuration
454