Huawei NetEngine80E Configuration Manual - Reliability page 203

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[NPE2-Eth-Trunk1.1] admin-vrrp vrid 10 ignore-if-down
[NPE2-Eth-Trunk1.1] quit
[NPE2] interface gigabitethernet1/0/1.100
[NPE2-GigabitEthernet1/0/1.100] qinq vrrp pe-vid 10 ce-vid 101
[NPE2-GigabitEthernet1/0/1.100] vrrp vrid 100 virtual-ip 10.100.1.200
[NPE2-GigabitEthernet1/0/1.100] quit
[NPE2] interface gigabitethernet1/0/1.101
[NPE2-GigabitEthernet1/0/1.101] qinq vrrp pe-vid 10 ce-vid 201
[NPE2-GigabitEthernet1/0/1.101] vrrp vrid 101 virtual-ip 10.101.1.200
[NPE2-GigabitEthernet1/0/1.101] quit
[NPE2] interface gigabitethernet1/0/1.102
[NPE2-GigabitEthernet1/0/1.102] qinq vrrp pe-vid 10 ce-vid 301
[NPE2-GigabitEthernet1/0/1.102] vrrp vrid 102 virtual-ip 10.102.1.200
[NPE2-GigabitEthernet1/0/1.102] quit
[NPE2] interface gigabitethernet1/0/1.103
[NPE2-GigabitEthernet1/0/1.103] qinq vrrp pe-vid 10 ce-vid 401
[NPE2-GigabitEthernet1/0/1.103] vrrp vrid 103 virtual-ip 10.103.1.200
[NPE2-GigabitEthernet1/0/1.103] quit
After the previous configurations, run the display vrrp brief command on NPE1 and NPE2.
The command output is as follows:
On NPE1:
l For the VRRP backup group with the VRID being 10, State is Master and Type is Admin.
l For the VRRP backup group with the VRID not being 10, State is Master and Type is Normal.
[NPE1] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
On NPE2:
l For the VRRP backup group with the VRID being 10, State is Backup and Type is Admin.
l For the VRRP backup group with the VRID not being 10, State is Master and Type is Normal.
[NPE2] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
Step 4 Bind the service VRRP backup group to the mVRRP backup group on NPE1 and NPE2.
# Configure NPE1.
[NPE1] interface gigabitethernet1/0/1.100
[NPE1-GigabitEthernet1/0/1.100] vrrp vrid 100 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE1-GigabitEthernet1/0/1.100] quit
[NPE1] interface gigabitethernet1/0/1.101
[NPE1-GigabitEthernet1/0/1.101] vrrp vrid 101 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE1-GigabitEthernet1/0/1.101] quit
[NPE1] interface gigabitethernet1/0/1.102
Issue 02 (2011-09-10)
State Interface
Master Eth-Trunk1.1
Master GE1/0/1.100
Master GE1/0/1.101
Master GE1/0/1.102
Master GE1/0/1.103
State Interface
Backup Eth-Trunk1.1
Master GE1/0/1.100
Master GE1/0/1.101
Master GE1/0/1.102
Master GE1/0/1.103
NOTE
According to the split horizon rule of the VPLS convergence network, VRRP packets cannot be exchanged
between the service VRRP backup groups of NPE1 and NPE2. Hence, the status of the service VRRP
backup groups of NPE1 and NPE2 is Master.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type Virtual IP
Admin 10.1.1.1
Normal 10.100.1.200
Normal 10.101.1.200
Normal 10.102.1.200
Normal 10.103.1.200
Type Virtual IP
Admin 10.1.1.1
Normal 10.100.1.200
Normal 10.101.1.200
Normal 10.102.1.200
Normal 10.103.1.200
4 VRRP Configuration
186