Huawei NetEngine80E Configuration Manual - Reliability page 190

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
102
103
On NPE1, run the undo shutdown command on GE 1/0/1.100 and GE1/0/1.101 to replicate the
recovery of the fault between NPE1 and CE1 or between NPE1 and CE2.
The command output shows that the BFD sessions between NPE1 and CE1 and between NPE1
and CE2 go Up.
[NPE1] display bfd session all
--------------------------------------------------------------------------------
Local
--------------------------------------------------------------------------------
8192
8193
8194
8195
8196
--------------------------------------------------------------------------------
It indicates that the statuses of VRRP backup groups on NPE1 and NPE2 recover.
On NPE1:
l For the VRRP backup group with the VRID being 10, State is Master and Type is Admin.
l For the VRRP backup group with the VRID not being 10, State is Master and Type is Member.
[NPE1] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
On NPE2:
l For the VRRP backup group with the VRID being 10, State is Backup and Type is Admin.
l For the VRRP backup group with the VRID not being 10, State is Backup and Type is
[NPE2] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
----End
Configuration Files
l
Issue 02 (2011-09-10)
Master GE1/0/1.102
Master GE1/0/1.103
Remote PeerIpAddr
8192 10.1.1.253
8192 10.100.1.1
8193 10.101.1.1
8194 10.102.1.1
8195 10.103.1.1
Total UP/DOWN Session Number : 5/0
State Interface
Master GE1/0/1.1
Master GE1/0/1.100
Master GE1/0/1.101
Master GE1/0/1.102
Master GE1/0/1.103
Member.
State Interface
Backup GE1/0/1.1
Backup GE1/0/1.100
Backup GE1/0/1.101
Backup GE1/0/1.102
Backup GE1/0/1.103
Configuration file of NPE1
#
sysname NPE1
#
bfd
#
interface GigabitEthernet1/0/1
undo shutdown
mode user-termination
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Member 10.102.1.200
Member 10.103.1.200
State Type
Up S_AUTO_IF
Up S_AUTO_IF
Up S_AUTO_IF
Up S_AUTO_IF
Up S_AUTO_IF
Type Virtual IP
Admin 10.1.1.1
Member 10.100.1.200
Member 10.101.1.200
Member 10.102.1.200
Member 10.103.1.200
Type Virtual IP
Admin 10.1.1.1
Member 10.100.1.200
Member 10.101.1.200
Member 10.102.1.200
Member 10.103.1.200
4 VRRP Configuration
InterfaceName
GigabitEthernet1/0/1.1
GigabitEthernet1/0/1.100
GigabitEthernet1/0/1.101
GigabitEthernet1/0/1.102
GigabitEthernet1/0/1.103
173