Configuring The Interval At Which Trap Messages Are Sent; Establishing The Configuration Task - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
5.14 Configuring the Interval at Which Trap Messages Are
Sent
The interval at which trap messages are sent is set, helping a device to suppress BFD trap
messages.

5.14.1 Establishing the Configuration Task

Before configuring the interval at which trap messages are sent, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the data required for
the configuration. This will help you complete the configuration task quickly and accurately.
Applicable Environment
If BFD is enabled with the SNMP trap function, the NMS receives messages indicating that the
BFD session is Up or Down. If the BFD session flaps, the NMS will receive a large number of
trap messages. In this case, BFD trap messages need to be suppressed. Setting the interval at
which trap messages are sent prevents overflow of trap messages.
Pre-configuration Tasks
Before configuring the interval at which trap messages are sent, enable BFD globally.
Data Preparation
To configure the interval at which trap messages are sent, you need the following data.
No.
1

5.14.2 Configuring the Interval at Which Trap Messages Are Sent

When BFD sessions flap, the NMS receives a great number of trap messages. The interval at
which trap messages are sent is set, helping a device suppress trap messages.
Context
Do as follows on the router that needs to be configured with the interval at which trap messages
are sent:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 02 (2011-09-10)
Data
Interval at which trap messages are sent
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 BFD Configuration
278