Huawei NetEngine80E Configuration Manual - Reliability page 277

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Prerequisite
The configurations of the multi-hop BFD function are complete.
Context
Procedure
l
l
l
l
l
l
l
----End
Example
After the configuration, run the
<HUAWEI> display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 256
--------------------------------------------------------------------------------
Local Discriminator
Session Detect Mode
BFD Bind Type
Bind Session Type
Bind Peer Ip Address
Bind Interface
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms): 10
Local Detect Multi
Echo Passive
Destination Port
Proc interface status
WTR Interval (ms)
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
Issue 02 (2011-09-10)
NOTE
Only after the parameters of the session are set and the session is set up, you can view the information on
the session.
Run the display bfd configuration
discr-value | dynamic | peer-ip peer-ip [ vpn-instance vpn-instance-name ] } [ verbose ]
command to check BFD configurations.
Run the display bfd configuration
instance-name ] } [ verbose ] command to check BFD6 configurations.
Run the display bfd session
ip [ vpn-instance vpn-instance-name ] | static } [ verbose ] [ slot slot-id ] to check the
BFD session.
Run the display bfd session
name } [ verbose ] [ slot slot-id ] command to check information about the BFD6 session.
Run the display bfd statistics
Run the display bfd statistics session
peer-ip [ vpn-instance vpn-instance-name ] } [ slot slot-id ] to check the statistics of the
BFD session.
Run the display bfd statistics session
vpn-instance-name ] } [ slot slot-id ] command to check statistics of the BFD6 session.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
{ all | static [ name cfg-name ] | discriminator local-
{ all | static | peer-ipv6 peer-ipv6 [ vpn-instance vpn-
{ all | discriminator discr-value | dynamic | peer-ip peer-
{ all | static | peer-ipv6 peer-ipv6 [ vpn-instance vpn-instance-
[ slot slot-id ] to check the global statistics of the BFD session.
{ all | static | discriminator discr-value | peer-ip
{all | static | peer-ipv6 peer-ipv6 [ vpn-instance
display bfd session
(Multi Hop) State : Up
: 10 Remote Discriminator
: Asynchronous Mode Without Echo Function
: Peer Ip Address
: Static
: 10.2.1.2
: --
: 1 TOS-EXP
: 10 Min Rx Interval (ms)
Actual Rx Interval (ms): 10
: 3 Detect Interval (ms)
: Disable Acl Number
: 3784 TTL
: Disable Process PST
: --
: 3
: No Diagnostic
: No Application Bind
: -- Session Detect TmrID
: -- Session WTR TmrID
5 BFD Configuration
all verbose command.
Name : atoc
: 20
: 7
: 10
: 30
: --
: 255
: Enable
: --
: --
260