Huawei NetEngine80E Configuration Manual - Reliability page 74

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure single-chassis APS.
1.
2.
Step 2 Configure the CPOS-Trunk.
1.
2.
3.
Issue 02 (2011-09-10)
Configure single-chassis APS on the two CPOS interfaces, and add the CPOS interfaces
to a CPOS-Trunk.
Bundle timeslots of E1 channels in the CPOS-Trunk to create Trunk-Serial interfaces, and
add the Trunk-Serial interfaces into a Global-MP-Group.
APS parameters
CPOS-Trunk parameters
Global-MP-Group interface number
Configure single-chassis APS on Router A.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] controller cpos 1/0/0
[RouterA-Cpos1/0/0] undo shutdown
[RouterA-Cpos1/0/0] aps group 1
[RouterA-Cpos1/0/0] aps working
[RouterA-Cpos1/0/0] quit
[RouterA] controller cpos 2/0/0
[RouterA-Cpos2/0/0] undo shutdown
[RouterA-Cpos2/0/0] aps group 1
[RouterA-Cpos2/0/0] aps protect
[RouterA-Cpos2/0/0] aps mode one-plus-one unidirection
[RouterA-Cpos2/0/0] quit
Create a CPOS-Trunk on Router A and add CPOS interfaces to the CPOS-Trunk.
[RouterA] interface cpos-trunk 0
[RouterA-Cpos-Trunk0] quit
[RouterA] controller cpos 1/0/0
[RouterA-Cpos1/0/0] cpos-trunk 0
[RouterA-Cpos1/0/0] quit
[RouterA] controller cpos 2/0/0
[RouterA-Cpos2/0/0] cpos-trunk 0
[RouterA-Cpos2/0/0] quit
Bundle timeslots of E1 channels in the CPOS-Trunk.
[RouterA] interface cpos-trunk 0
[RouterA-Cpos-Trunk0] e1 1 unframed
[RouterA-Cpos-Trunk0] e1 2 unframed
[RouterA-Cpos-Trunk0] quit
Create a Global-MP-Group.
[RouterA] interface global-mp-group 0
[RouterA-Global-Mp-Group0] shutdown
[RouterA-Global-Mp-Group0] quit
Add Trunk-Serial interfaces to the Global-MP-Group.
[RouterA] interface Trunk-Serial0/1:0
[RouterA-Trunk-Serial0/1:0] shutdown
[RouterA-Trunk-Serial0/1:0] link-protocol ppp
[RouterA-Trunk-Serial0/1:0] ppp mp-global global-mp-group 0
[RouterA-Trunk-Serial0/1:0] quit
[RouterA] interface Trunk-Serial0/2:0
[RouterA-Trunk-Serial0/2:0] shutdown
[RouterA-Trunk-Serial0/2:0] link-protocol ppp
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
57