Show Snmp Engine-Id - Edge-Core ES4524M-PoE Management Manual

4
Command Line Interface
Command Usage
• An SNMP engine is an independent SNMP agent that resides either on this
switch or on a remote device. This engine protects against message replay,
delay, and redirection. The engine ID is also used in combination with user
passwords to generate the security keys for authenticating and encrypting
SNMPv3 packets.
• A remote engine ID is required when using SNMPv3 informs. (See
snmp-server host on page 4-64.) The remote engine ID is used to compute
the security digest for authenticating and encrypting packets sent to a user on
the remote host. SNMP passwords are localized using the engine ID of the
authoritative agent. For informs, the authoritative SNMP agent is the remote
agent. You therefore need to configure the remote agent's SNMP engine ID
before you can send proxy requests or informs to it.
• Trailing zeroes need not be entered to uniquely specify a engine ID. In other
words, the value "0123456789" is equivalent to "0123456789" followed by 16
zeroes for a local engine ID.
• A local engine ID is automatically generated that is unique to the switch. This
is referred to as the default engine ID. If the local engineID is deleted or
changed, all SNMP users will be cleared. You will need to reconfigure all
existing users (page 4-73).
Example
Console(config)#snmp-server engineID local 12345
Console(config)#snmp-server engineID remote 54321 192.168.1.19
Console(config)#
Related Commands
snmp-server host (4-64)

show snmp engine-id

This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID
80000000030004e2b316c54321
Console#
4-68
IP address
192.168.1.19