Attaching A Policy Map To A Port - Edge-Core ECS4810-12M Layer 2 Management Manual

A P
TTACHING A OLICY
M P
AP TO A ORT
Use the Traffic > DiffServ (Configure Interface) page to bind a policy map
to a port.
CLI R
EFERENCES
"Quality of Service Commands" on page 1157
◆
C U
OMMAND SAGE
First define a class map, define a policy map, and then bind the service
policy to the required interface.
P
ARAMETERS
These parameters are displayed:
◆ Port – Specifies a port.
Ingress – Applies the selected rule to ingress traffic.
◆
Egress – Applies the selected rule to egress traffic.
◆
W I
EB NTERFACE
To bind a policy map to a port:
Click Traffic, DiffServ.
1.
Select Configure Interface from the Step list.
2.
Check the box under the Ingress or Egress field to enable a policy map
3.
for a port.
Select a policy map from the scroll-down box.
4.
Click Apply.
5.
– 305 –
| Quality of Service
C 11
HAPTER

Attaching a Policy Map to a Port