Table 30: Show Snmp Engine-Id - Display Description - Edge-Core ECS4620-28P Cli Reference Manual

Chapter 5
| SNMP Commands
SNMPv3 Commands
show snmp engine-id
This view includes the MIB-2 interfaces table, ifDescr. The wild card is used to select
all the index values in the following table.
Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2 included
Console(config)#
This view includes the MIB-2 interfaces table, and the mask selects all index entries.
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#
This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP EngineID: 8000002a8000000000e8666672
Local SNMP EngineBoots: 1
Remote SNMP Engine ID
80000000030004e2b316c54321
Console#

Table 30: show snmp engine-id - display description

Field
Local SNMP engineID
Local SNMP engineBoots
Remote SNMP engineID
IP address
Description
String identifying the engine ID.
The number of times that the engine has (re-)initialized since the snmp
EngineID was last configured.
String identifying an engine ID on a remote device.
IP address of the device containing the corresponding remote SNMP
engine.
– 218 –
IP address
192.168.1.19