Table 66: Show Snmp Engine-Id - Display Description; Show Snmp Group - Edge-Core ECS4510-28P User Manual

| SNMP Commands
C 23
HAPTER
SNMPv3 Commands
show snmp engine-
id

show snmp group

This command shows the SNMP engine ID.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP EngineID: 8000002a8000000000e8666672
Local SNMP EngineBoots: 1
Remote SNMP EngineID
80000000030004e2b316c54321
Console#

Table 66: show snmp engine-id - display description

Field Description
Local SNMP engineID String identifying the engine ID.
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the
snmp EngineID was last configured.
Remote SNMP engineID String identifying an engine ID on a remote device.
IP address IP address of the device containing the corresponding remote
SNMP engine.
Four default groups are provided – SNMPv1 read-only access and read/
write access, and SNMPv2c read-only access and read/write access.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show snmp group
Group Name: r&d
Security Model: v3
Read View: defaultview
Write View: daily
Notify View: none
Storage Type: permanent
Row Status: active
Group Name: public
Security Model: v1
Read View: defaultview
Write View: none
Notify View: none
Storage Type: volatile
Row Status: active
Group Name: public
Security Model: v2c
Read View: defaultview
– 796 –
IP address
192.168.1.19