Show Classofservice Trust - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.2.6 show classofservice trust

This command displays the current trust mode for the specified interface.
The slot/port parameter is optional. If specified, the trust mode of the inter-
face is displayed. If omitted, the most recent global configuration settings are
displayed.
Format
show classofservice trust [slot/port]
Mode
Privileged EXEC
Class of Service Trust Mode
The current trust mode: Dot1p, IP DSCP, or Untrusted.
Untrusted Traffic Class
The traffic class used for all untrusted traffic. This is only displayed
when the COS trust mode is set to 'untrusted'.
62
4.2 Class of Service (CoS) Commands
CLI L2B
Release 4.0 11/07