CLI Commands: Base
4.2.4 show classofservice dot1p-mapping
This command displays the current 802.1p priority mapping to internal traffic
classes for a specific interface. The slot/port parameter is required on
platforms that support priority to traffic class mapping on a 'per-port' basis.
Platforms that support priority to traffic class mapping on a per-port basis:
Format
show classofservice dot1p-mapping [<slot/port>]
Platforms that do not support priority to traffic class mapping on a per-port
basis:
Format
s
how classofservice dot1p-mapping
Mode
Privileged EXEC and User EXEC
60
4.2 Class of Service (CoS) Commands
CLI L2B
Release 4.0 11/07