Serial Timeout - Hirschmann RS20 Reference Manual

CLI Commands: Base
4.3.7

serial timeout

This command specifies the maximum connect time (in minutes) without
console activity. A value of 0 indicates that a console can be connected in-
definitely. The time range is 0 to 160.
Default
5
Format
serial timeout <
Mode
Line Config
no serial timeout
U
This command sets the maximum connect time without console activity
(in minutes) back to the default value.
Format
no serial timeout
Mode
Line Config
68
>
0-160
4.3 Management Commands
CLI L2B
Release 4.0 11/07