Inspection Of Forward (A) Gear And Pinion (B) Gear; Inspection Of Gear Case - TOHATSU TLDI MD 115A SERIES Service Manual

Remove taper roller bearing outer race w.
2.
Put the slide hammer in the gear case, hook claw of slide
hammer on the outer race to fix it, and slide the hammer to
pull out the outer race.
Slide Hammer Kit :
P/N. 3AC-99080-0
Confirm the position of insertion groove in the
back of outer race, and put the claw of slide
hammer in the groove.
This work can also be done by using the following tool.
Bevel Gear Bearing Puller Ass'y :
P/N. 3B7-72755-0
27) Inspection of Forward (A) Gear and
Pinion (B) Gear
1. Check gear teeth and dog for crack, wear and damage.
Replace if necessary.

28) Inspection of Gear Case

Also check skeg a and torpedo-like area b for crack and
1.
other damage.
Replace if necessary.
TLDI 115A 2007
w
1 Outer Race
Do not reuse.
b
a
w
6-31
6