Disassembly And Inspection Of Vapor Separator - TOHATSU TLDI MD 115A SERIES Service Manual

5) Disassembly and Inspection of
Vapor Separator
1. Remove float chamber of vapor separator, and then,
remove float valve 1 and float 2.
2. Inspection of Vapor Separator
1. Check needle valve 1 for deformation and wear.
2. Check float 2 for deformation, crack and other
defects.
Replace if necessary.
3. Check if any dirt or dust is in the vapor separator.
Replace if necessary.
TLDI 115A 2007
1
2
4
4-27