Assembling Ptt Unit Parts - TOHATSU TLDI MD 115A SERIES Service Manual

6. Cover tilt cylinder opening with clean cloth 1 and apply
compressed air from hole a to remove free piston 2.
Do not look into tilt cylinder opening
because free piston or power trim fluid may
fly out of the opening due to the internal
pressure.
7. Loosen tilt cylinder rod guide and take out trim piston
ass'y.

23) Assembling PTT Unit Parts

Put recommended PTT fluid into the unit through hole a.
1.
Recommended Power Trim and Tilt Fluid :
OIL
ATF DEXRON
682 cm 3 (23.0 floz.)
2. Push free piston 1 into tilt cylinder unit fully to the bottom.
TLDI 115A 2007
WARNING
III
1
2
a
a
7
1
7-37