Drag Link - TOHATSU TLDI MD 115A SERIES Service Manual

2) Drag Link

1. Attach drag link as shown.
When installing steering rod that connects
engine and steering cable, be sure to use
special bolt ( 1 : 3E0-84917-0) and nylon lock
nuts ( 2 : 353-84918-0 and 3 : 353-84916-0).
Do not use regular non-lock type nuts in place of
these lock nuts, or the nuts may be loosened
due to mechanical vibration resulting in
disconnection of the link rod.
Disconnection of steering rod will cause
the boat to turn accidentally. The sudden
turn of the boat may cause the passenger
to be thrown overboard, leading to serious
injury or fatal accident.
Bolt 1 P/N. 3E0-84917-0 :
27.1 N · m (20 lb · ft) [2.7 kgf · m]
Nylon Nuts 2 P/N. 353-84918-0 :
Fully tighten, and then loosen 1/4 of a turn.
Washer 3 P/N. 353-84916-0
Drag Link Spacer 4 P/N. 3E0-84914-0
TLDI 115A 2007
WARNING
2
3
1
2
3
4
3
1
3
2
3
2
10
10-9