TOHATSU TLDI MD 115A SERIES Service Manual page 93

Fuel System (TLDI)
Loosen three bolts 8 that secure air rail, and remove air
4.
rail ass'y 9 carefully.
Disconnect fuel injector cord wires before
removing the air rail.
Refer to "Chapter 5 Removing Cord Ass'y.
5. When removing the air rail, leave the air injectors on the
cylinder side.
Be careful not to drop O ring located on the air
injectors.
Pull the air rail straight without applying force to
the air injectors.
After removing air rail ass'y, remove four air injectors q
6.
and air injector set pieces 0.
When removing the air injectors, pull out them
straight without applying force to their tips.
7. Turn each fuel injector carefully to loosen O ring, and
insert bladed screw drivers from both sides to remove it up
straight evenly.
Handle fuel injectors carefully. Impacting
their tips can cause malfunction.
4-20
CAUTION
0
q
9
8
TLDI 115A 2007