Assembling Coil Bracket Parts; Assembling Crank Case Head Parts - TOHATSU TLDI MD 115A SERIES Service Manual

Power Unit
5. Install thermostat, thermo-cap and gasket.
Final Tightening :
6 N · m (4 lb · ft) [0.6 kgf · m]
Tighten head cover bolts M6 after tightening
bolts M8. Never tighten bolts M6 before
tightening bolts M8.

25) Assembling Coil Bracket Parts

1. Apply grease and oil to oil seal and press-fit it to coil
bracket.
Driver Rod 1 :
P/N. 3AC-99702-0
Oil Seal Attachment 2 :
P/N. 3U1-99820-0

26) Assembling Crank Case Head Parts

1. Apply grease and oil to oil seal 19.6-35-10 and press-fit it
to crank case head.
Driver Rod 1 :
P/N. 3AC-99702-0
Oil Seal Attachment 3 :
P/N. 3U1-99820-0
2. Apply grease and oil to oil seal 35-589 and press-fit it to
crank case head.
Driver Rod 1 :
P/N. 3AC-99702-0
Oil Seal Attachment 4 :
P/N. 3E0-99820-0
5-50
1
Lip
LIT
LIT
1
2
Lip
1
LIT
LIT
3
Lip
LIT
LIT
4
2
Circumference
2st
2st OIL
Circumference
2st
2st OIL
Circumference
2st
2st OIL
TLDI 115A 2007