Fuel System (TLDI)
8) Assembly of Compressor Housing
Apply two stroke engine oil to periphery of bearing 3, and
1.
install it into compressor housing by using a press.
Driver Rod 1 :
P/N. 3AC-99702-0
Bearing Attachment 2 :
P/N. 3T1-99905-0
Do not reuse removed bearing.
Apply two stroke engine oil to periphery of oil seal 5,
2.
lithium grease to the lip area, and install it into
compressor housing by using a press
Driver Rod 1 :
P/N. 3AC-99702-0
Oil Seal Attachment 4 :
P/N. 3T1-99820-0
Be careful of orientation of oil seal when it is
installed.
4-40
1
2
3 Bearing
Do not reuse
1
2
3 Bearing
Do not reuse
1
4
5 Oil Seal
Do not reuse
3
2st
2st OIL
3
2st
2st OIL
5
LIT
2st
LIT
2st OIL
TLDI 115A 2007