TOHATSU TLDI MD 115A SERIES Service Manual page 292

6-1-6. Crankcase head oil seal is faulty.
6-2-1. Refer to 2-3.
6-3-1. Fuel tank is empty or fuel level is low.
6-3-2. Air vent is closed.
6-3-3. Sucks air through crack or loose connection.
6-3-4. Water is in the fuel filter.
6-3-5. Fuel filter is clogged.
6-3-6. Fuel hose is clogged.
6-3-7. Lift pump is not operating.
6-3-8. FFP leaks in the case.
6-3-9. Fuel regulator leaks.
6-3-10. Fue leaks.
6-3-11. Air pressure is low.
6-4-1. Refer to 2-4-3.
6-4-2. Fuel injector deposited with carbon.
6-4-3. Component(s) malfunctions or connections are loose.
7-1-1. Incorrect propeller selection
7-1-2. Propeller slips on the shaft.
7-1-3. Propeller is deformed or damaged.
7-1-4. Shaft length - boat transom mismatching
7-1-5. Trim angle incorrect
7-1-6. Boat's bottom is foul.
7-1-7. Boat loading position incorrect
7-1-8. Boat is overloaded.
7-1-9. Hull shape incorrect.
Main switch contact point is faulty or harness is internally
8-1-1.
broken.
Stop switch contact point is faulty or harness is internally
8-1-2.
broken.
Ground wire connection is loose or harness is internally
8-1-3.
broken.
TLDI 115A 2007
Cause
Action to be taken
(Refer to reference value or service data.)
Check, and repair if necessary.
Refer to 2-3.
Refer to 2-2-1.
Refer to 2-2-2.
Check, and repair if necessary.
Check and clean if necessary.
Check interior of fuel tank, hull, and engine fuel filter, and
clean or replace fuel filter if necessary.
Check fuel pipes if they are twisted, collapsed or bent.
Check, and repair if necessary. Or replace.
Check internal component rubber seal and electric fuel pump.
Replace.
Check hose damage and connections.
Refer to 2-3.
Refer to 2-4-3.
Check. and clean, or replace if necessary.
Check, and repair or replace if necessary.
Check, and repair or replace if necessary.
Check, and adjust if necessary.
Check, and clean if necessary.
Check, and adjust if necessary.
Check, and repair if necessary. Or replace.
9
9-11