TOHATSU TLDI MD 115A SERIES Service Manual page 104

Attach upper grommet e and cable terminal grommets 3.
4.
Terminal area of parts 3, 7 and e :
Genuine Engine Oil
2st
Attach black wire 7 ( - ) and red wire 7 ( + ) of cable
terminal to FFP case.
Be sure to connect the wires to their
corresponding flat terminals ( - and + ).
5. Connect FFP cords r to their corresponding terminals 7.
Push down cables terminals to connect
terminals securely. Be careful that the cords are
not caught.
Attach cord cover y and clamp u to the body by using
spacer (washer) t and bolt i.
FFP Bolt i :
3.2 N·m (2.3 lb·ft) [0.32 kgf·m]
Attach cable terminal grommet (upper) 2, put seal ring (O
6.
ring) 4 and upper case 0 and then, secure the parts with
bolts o.
Cable Terminal Grommet Upper 2, O Ring 4 :
Genuine Engine Oil
2st
FFP Case (Upper) Bolt o :
3.2 N·m (2.3 lb·ft) [0.32 kgf·m]
TLDI 115A 2007
0
2
2st
2st OIL
7
7
2st
2st OIL
2st
2st OIL
3
2st
2st OIL
y
i
u
t
Yellow
Blue
o
2st
2st OIL
4
e
2st
2st OIL
4
r
4-31