Removing Steering Shaft Arm - TOHATSU TLDI MD 115A SERIES Service Manual

Cowl, Bracket and PTT
7. Install idle exhaust passage.
Idle exhaust passage is designed to reduce engine idling
noise.
After installing the idle exhaust passage, check that no
exhaust gas and cooling water leak through the
installation face.
Idle Exhaust Installation Bolts q :
6 N · m (4 lb · ft) [0.6 kgf · m]

10) Removing Steering Shaft Arm

Remove "C" ring 1 that supports mount bracket.
1.
Remove mount bracket 2.
2.
When mount bracket cannot be removed, tap
the bracket at both ends alternately by using a
plastic hammer.
7-24
1
2
q
TLDI 115A 2007