Cooling System; Inspection Of Cooling Water Passage - TOHATSU TLDI MD 115A SERIES Service Manual

Set the lever of pressure gauge ass'y to postion b to relief
5.
pressure.
When depressuring, collect fuel that spills
from the tip of the gauge.
6. Remove gauge.
Be careful not to let the fuel in the gauge
leak when removing the gauge.
7. Attach the cap.

5. Cooling System

1) Inspection of Cooling Water Passage

1. Check that cooling water intake is clogged. Clean if
necessary.
2. Set lower unit in the water and start engine.
Check that cooling water check port 1 ejects water.
3.
TLDI 115A 2007
CAUTION
CAUTION
1
3
3-9