TOHATSU TLDI MD 115A SERIES Service Manual page 96

8. Attaching Hose Clamps
(1) Attach the following parts.
Install fuel regulator 1 and air regulator 3, secure
them using collars 4, plate 5 and bolt 6, and
attach clamp 7.
Be sure to install collar 4 below plate 5.
Attach hose to fuel regulator by using hose clamp
2.
Do not reuse hose clamp. Always use new one.
Clamp Pliers :
P/N. 3T5-72864-0
(2) Removing hose clamp
Cut joint of hose clamp 2 and remove the clamp.
Remove hose clamp without cutting
joint will damage fuel hose.
(3) Attaching hose clamp.
Crush hose clamp 2 as shown to tighten the hose
securely.
Do not reuse hose clamp. Be sure to
use new one.
TLDI 115A 2007
CAUTION
WARNING
3
4
1
2
2
Do not reuse
2
Do not reuse
2
Do not reuse
5
7 7
6
4
2
2
4-23